Caterpillar 259D Compact Track Loader And Specs
OVERVIEW
The Cat 259D Compact Track Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its standard, suspended undercarriage system provides superior traction, flotation, stability, and speed to work in a wide range of applications and underfoot conditions.
ENGINE
Engine Model
Cat C3.3B DIT (turbo)
Net Power
73.20 hp
Gross Power
74.30 hp
Gross Power SAE J1995
74.30 hp
Net Power SAE 1349
73.20 hp
Displacement
203.00 in3
Bore
3.70 in
Stroke
4.70 in
OPERATING SPECIFICATIONS
Rated Operating Capacities – 50% Tipping Load
2900.00 lb
Rated Operating Capacities – 35% Tipping Load
2030.00 lb
Ground Contact Area – With 320 mm/12.6 in Track
1483.00 in²
Ground Pressure – With 320 mm/12.6 in Track
6.00 psi
Tipping Load
5800.00 lb
Breakout Force, Tilt Cylinder
5035.00 lb
POWER TRAIN
Travel Speed (Forward or Reverse): One Speed
5.90 mph
Travel Speed (Forward or Reverse): Two Speed
8.50 mph
WEIGHTS
Operating Weight
8945.00 lb
SERVICE REFILL CAPACITIES
Cooling System
3.70 gal
Engine Crankcase
3.00 gal
Fuel Tank
27.70 gal
Hydraulic System
13.20 gal
Hydraulic Tank
10.30 gal
DIMENSIONS
Length of Track on Ground
59.00 in
Overall Length – Track
78.70 in
Length with Bucket on Ground
137.30 in
Length without Bucket
108.90 in
Height to Top of Cab
83.10 in
Vehicle Width (320 mm/12.6 in tracks)
66.00 in
Maximum Overall Height
154.10 in
Bucket Pin Height at Maximum Lift
121.00 in
Bucket Pin Height at Carry Position
7.80 in
Reach at Maximum Lift and Dump
23.90 in
Clearance at Maximum Lift and Dump
89.90 in
Ground Clearance
8.90 in
Departure Angle
35°
Vehicle Width (400 mm/15.7 in tracks)
69.00 in
52°
Turning Radius from Center – Machine Rear
61.50 in
Turning Radius from Center – Coupler
54.80 in
Turning Radius from Center – Bucket
86.00 in
Maximum Reach with Arms Parallel to Ground
51.40 in
Rack Back Angle at Maximum Height
87°
Bucket Pin Reach at Maximum Lift
9.40 in
HYDRAULIC SYSTEM
Hydraulic Flow – Standard: Loader Hydraulic Pressure
3335.00 psi
Hydraulic Flow – Standard: Loader Hydraulic Flow
20.00 gal/min
Hydraulic Flow – Standard: Hydraulic Power (calculated)
39.00 hp
Hydraulic Flow – High Flow: Loader Hydraulic Pressure
3335.00 psi
Hydraulic Flow – High Flow: Loader Hydraulic Flow
30.00 gal/min
Hydraulic Flow – High Flow: Hydraulic Power (calculated)
58.00 hp
CAB
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II
ENGINE
Net Power ISO 9249
73.90 hp
Peak Torque at 1,500 rpm SAE J1995
195.00 lbf-ft
WEIGHTS
Operating Weight – 320 mm/12.6 in Tracks
8846.00 lb
Operating Weight – 400 mm/15.7 in Tracks
8945.00 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
OPERATING SPECIFICATIONS
Rated Operating Capacity with Optional Counterweight
3100.00 lb
Ground Contact Area (400 mm/15.7 in track)
1848.00 in2
Ground Pressure (400 mm/15.7 in track)
4.80 psi
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
DIMENSIONS
Vehicle Width (400 mm/15.7 in tracks)
69.00 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
NOISE LEVEL
Inside Cab**
83.00 dB(A)
Outside Cab***
103.00 dB(A)
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
AIR CONDITIONING SYSTEM
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
ENGINE
Engine Model
Cat C3.3B DIT (turbo)
Net Power
73.20 HP
Gross Power
74.30 HP
Gross Power – SAE J1995
74.30 HP
Net Power – SAE 1349
73.20 HP
Displacement
203.00 in³
Bore
3.70 in
Stroke
4.70 in
WEIGHTS
Operating Weight
8945.00 lb
OPERATING SPECIFICATIONS
Tipping Load
5800.00 lb
Breakout Force – Tilt Cylinder
5035.00 lb
DIMENSIONS
Length – Track on Ground
59.00 in
Height – Top of Cab
83.10 in
Ground Clearance
8.90 in
Departure Angle
35°
Maximum Dump Angle
52°
Bucket Pin Height – Carry Position
7.80 in
Bucket Pin Height – Maximum Lift
121.00 in
Bucket Pin Reach – Maximum Lift
9.40 in
Clearance at Maximum Lift and Dump
89.90 in
Length – With Bucket on Ground
137.30 in
Length – Without Bucket
108.90 in
Maximum Overall Height
154.10 in
Maximum Reach – With Arms Parallel to Ground
51.40 in
Rack Back Angle – Maximum Height
87°
Reach – Maximum Lift/Dump
23.90 in
Turning Radius from Center – Bucket
86.00 in
Turning Radius from Center – Coupler
54.80 in
Turning Radius from Center – Machine Rear
61.50 in
Vehicle Width (320 mm/12.6 in tracks)
66.00 in
HYDRAULIC SYSTEM
Hydraulic Flow – High Flow – Hydraulic Power (Calculated)
58.00 HP
Hydraulic Flow – High Flow – Loader Hydraulic Flow
30.00 gal/min
Hydraulic Flow – High Flow – Loader Hydraulic Pressure
3335.00 psi
Hydraulic Flow – Standard – Hydraulic Power (Calculated)
39.00 HP
Hydraulic Flow – Standard – Loader Hydraulic Flow
20.00 gal/min
Hydraulic Flow – Standard – Loader Hydraulic Pressure
3335.00 psi
CAB
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
FOPS Level II
ISO 3449:2005 Level II
POWER TRAIN
Travel Speed – Forward or Reverse – One Speed
5.90 mile/h
Travel Speed – Forward or Reverse – Two Speed
8.50 mile/h
SERVICE REFILL CAPACITIES
Cooling System
3.70 gal (US)
Engine Crankcase
3.00 gal (US)
Fuel Tank
27.70 gal (US)
Hydraulic System
13.20 gal (US)
Hydraulic Tank
10.30 gal (US)
AIR CONDITIONING SYSTEM
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
DIMENSIONS
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
ENGINE
Net Power – ISO 9249
73.90 HP
Peak Torque – 1,500 rpm – SAE J1995
195.00 ft·lbf
NOISE LEVEL
Inside Cab**
83.00 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
**The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
***The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Outside Cab***
103.00 dB(A)
OPERATING SPECIFICATIONS
Ground Contact Area – With 400 mm/15.7 in Track
1848.00 in²
Ground Pressure – With 400 mm/15.7 in Track
4.80 psi
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Rated Operating Capacity with Optional Counterweight
3100.00 lb
WEIGHTS
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speed, OROPS, 1676 mm (66 in) dirt bucket, 320 mm (12.6 in) tracks, dual flange front idler/single flange rear idler, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
FEATURES
Comfortable Cab
Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort.
Outstanding Power
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an industry exclusive electronic hand/foot throttle with decel pedal capability. Electronically controlled Cat C3.3B engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards. High Flow hydraulic system is available for applications that demand maximum hydraulic work tool performance.
Versatility to Tackle Any Job
Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner. Standard fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. Broad range of performance matched Cat Work Tools makes the Cat Compact Track Loader the most versatile machine on the job site.
Advanced Display
Maximize machine capability and control with optional Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. The display also features multi-language functionality with customizable layouts, security system and rearview camera.
Easy Service
Ground level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.
SALES FEATURES
COMFORTABLE CAB
Industry leading sealed and pressurized cab option provides a cleaner and quieter operating environment with excellent work tool visibility. Available high-back, heated, air ride seat with seat mounted adjustable joystick controls makes the D Series the industry leader in operator comfort.
OUTSTANDING POWER
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an industry exclusive electronic hand/foot throttle with decel pedal capability. Electronically controlled Cat C3.3B engine provides high horsepower and torque while meeting U.S. EPA Tier 4 Final (EU Stage IIIB) emission standards. High Flow hydraulic system is available for applications that demand maximum hydraulic work tool performance.
VERSATILITY TO TACKLE ANY JOB
Cat “Intelligent Leveling” system (ILEV) provides industry leading technology, integration and optional features such as dual direction self level, work tool return to dig and work tool positioner. Standard fully independent torsion axle suspension combined with the optional Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. Broad range of performance matched Cat Work Tools makes the Cat Compact Track Loader the most versatile machine on the job site.
ADVANCED DISPLAY
Maximize machine capability and control with optional Advanced Display providing on-screen adjustments for implement response, hystat response and creep control. The display also features multi-language functionality with customizable layouts, security system and rearview camera.
EASY SERVICE
Ground level access to all daily service and routine maintenance points helps reduce machine downtime for greater productivity.